多层网络级联失效的预防和恢复策略概述

现实生活中,与国计民生密切相关的基础设施网络大多不是独立存在的,而是彼此之间相互联系或依赖的,于是用于研究这些系统的多层网络模型随之产生.多层网络中的节点在失效或者遭受攻击后会因"层内"和"层间"的相互作用而产生级联效应,从而使得失效能够在网络层内和层间反复传播并使得失效规模逐步放大.因此,多层网络比单个网络更加脆弱.多层网络级联失效产生的影响和损失往往是非常巨大的,所以对多层网络级联失效的预防和恢复的研究具有重大意义.就多层网络级联失效的预防而言,主要包含故障检测,保护重要节点,改变网络耦合机制和节点备份等策略.就多层网络发生级联失效后的恢复策略而言,主要包含共同边界节点恢复、空闲连边恢复、加边恢复、重要节点优先恢复、更改拓扑结构、局域攻击修复、自适应边修复等策略.     

复杂势场量子弹球中疤痕态的量子化条件

量子疤痕是波函数在经典不稳定周期轨道周围反常凝聚的一种量子或波动现象.人们对疤痕态的量子化条件进行了大量研究,对深入理解半经典量子化起到了一定的促进作用.之前大部分研究工作主要集中在硬墙量子弹球上,即给定边界形状的无穷深量子势阱系统.本文研究具有光滑复杂势场的二维量子弹球系统,考察疤痕态的量子化条件及其重复出现的规律,得到了与硬墙弹球不一样的结果,对理解这类现象是一个有益的补充.这些结果将有助于理解具有无规长程杂质分布的二维电子系统的态密度谱和输运行为.     

Crystal structure of K[PtCl3(caffeine)] and its interactions with important nitrogen-donor ligands

The crystal structure of K[PtCl₃(caffeine)] was determined. The coordination geometry around platinum is square-planar formed by N9 of the caffeine ligand and three Cl^? ions. The bond lengths and angles of K[PtCl₃(caffeine)] were compared with those reported for [PtCl₃(caffeine)]^? and K[PtCl₃(theobromine)]. At the level of the statistical significance of the data we have compared, no differences in the bond distances and angles for any of these compounds were noticed. Weak interactions between K⁺ and Cl^? are responsible for the formation of 1-D polymeric chains in the crystal structure of the complex. The interactions of K[PtCl₃(caffeine)] with inosine (Ino) and guanosine-5′-monophosphate (5′-GMP) were studied by ¹H NMR spectroscopy at 295 K in D₂O in a molar ratio of 1 : 1. The results indicate formation of the reaction product [PtCl₃(Nu)] (Nu=Ino or 5′-GMP) with the release of caffeine from the coordination sphere of the starting complex. The higher stability of the bond between the Pt(II) ion and Ino or 5′-GMP compared to the stability of the platinum–caffeine bond is confirmed by density functional theory calculations (B3LYP/LANL2DZp) using as models 9-methylhypoxanthine and 9-methylguanine.     

A highly active multi‐usable palladium pyridylfluorene film‐based catalyst for C–C cross‐coupling reactions

The two terminal pyridyl nitrogen atoms of 2,7‐bis(4‐pyridyl)fluorene ( 1 ) were coordinated to Pd(II) ions to give self‐assembled, multilayer films using the layer‐by‐layer (LbL) method. The films were prepared by alternately dipping the substrate, pre‐coated with a polyethyleneimine layer, in aqueous solutions of PdCl₂ and ethanol solutions of 1 . The resulting films were characterized using UV–visible absorption spectroscopy, atomic force microscopy (AFM), X‐ray photoelectron spectroscopy, scanning electron microscopy (SEM) and inductively coupled plasma atomic emission spectroscopy (ICP‐AES). UV–visible spectra and SEM images show almost uniform growth of the film in a near ideal LbL manner. AFM images show that nanostructured aggregates of Pd(II) complexes form on the surface. With an increase in the number of Pd(II)/ 1 bilayers, more particulate aggregates are distributed on the surface. When released from the substrate, the Pd(II) complex nanostructure shows high catalytic activity for Suzuki–Miyaura and Mizoroki–Heck cross‐coupling reactions. The catalyst loading is as low as 9.1 × 10^?3 mol% Pd, as measured using ICP‐AES, and high turnover numbers of up to 1.08 × 10⁴ are obtained. Copyright © 2015 John Wiley & Sons, Ltd.     

MOEPGA: A novel method to detect protein complexes in yeast protein–protein interaction networks based on MultiObjective Evolutionary Programming Genetic Algorithm

The identification of protein complexes in protein–protein interaction (PPI) networks has greatly advanced our understanding of biological organisms. Existing computational methods to detect protein complexes are usually based on specific network topological properties of PPI networks. However, due to the inherent complexity of the network structures, the identification of protein complexes may not be fully addressed by using single network topological property. In this study, we propose a novel MultiObjective Evolutionary Programming Genetic Algorithm (MOEPGA) which integrates multiple network topological features to detect biologically meaningful protein complexes. Our approach first systematically analyzes the multiobjective problem in terms of identifying protein complexes from PPI networks, and then constructs the objective function of the iterative algorithm based on three common topological properties of protein complexes from the benchmark dataset, finally we describe our algorithm, which mainly consists of three steps, population initialization, subgraph mutation and subgraph selection operation. To show the utility of our method, we compared MOEPGA with several state-of-the-art algorithms on two yeast PPI datasets. The experiment results demonstrate that the proposed method can not only find more protein complexes but also achieve higher accuracy in terms of fscore. Moreover, our approach can cover a certain number of proteins in the input PPI network in terms of the normalized clustering score. Taken together, our method can serve as a powerful framework to detect protein complexes in yeast PPI networks, thereby facilitating the identification of the underlying biological functions.     

Chemistry of Lipid A: At the Heart of Innate Immunity

In many Gram‐negative bacteria, lipopolysaccharide (LPS) and its lipid A moiety are pivotal for bacterial survival. Depending on its structure, lipid A carries the toxic properties of the LPS and acts as a potent elicitor of the host innate immune system via the Toll‐like receptor 4/myeloid differentiation factor 2 (TLR4/MD‐2) receptor complex. It often causes a wide variety of biological effects ranging from a remarkable enhancement of the resistance to the infection to an uncontrolled and massive immune response resulting in sepsis and septic shock. Since the bioactivity of lipid A is strongly influenced by its primary structure, a broad range of chemical syntheses of lipid A derivatives have made an enormous contribution to the characterization of lipid A bioactivity, providing novel pharmacological targets for the development of new biomedical therapies. Here, we describe and discuss the chemical aspects regarding lipid A and its role in innate immunity, from the (bio)synthesis, isolation and characterization to the molecular recognition at the atomic level.     

Salt effects on macrophase separations in non‐stoichiometric mixtures of oppositely charged macromolecules: Theory and experiment

In the field of biological applications, polyelectrolyte complexes are proposed to encapsulate bioactive compounds, to deliver drugs, and also to transfect genes into cells under the name of polyplexes. Complex formation is obtained by addition of a polycation solution into a polyanion solution or vice‐versa. This work proposes a theoretical approach to describe complex formation in the case of non‐stoichiometric mixtures of oppositely charged macroions having different degrees of ionization and different degrees of polymerization under different salt conditions. In a second part, comparison was made with experimental data collected when a weak polybase, namely poly(l ‐lysine) under its bromide form was added stepwise to solutions of various polyanions under their sodium salt form, namely poly(l ‐lysine citramide imide), poly(l ‐lysine citramide), and poly(β‐malic acid), the latter lacking hydroxyl groups attached to the main chain. The stability of stroichiometric complexes made of poly(l ‐lysine) and poly(l ‐lysine citramide) having different molecular masses is discussed. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1717–1730     

A new periodic pattern with five‐neighbored domain packing from ABC triblock terpolymer/B homopolymer blend

Self‐assembled structures from poly(isoprene‐b‐styrene‐b‐2‐vinylpyridine)(ISP)/styrene homopolymer blend were investigated. Five terpolymers whose total molecular weight, M, is in the narrow range of 121k < M < 214k, and volume fractions of the center block polystyrenes, ?_S, are similar at around 0.55, were prepared as parent block terpolymers. Their ?_P/?_I ratios, used as an indicator of asymmetry, are varied in the range 0.32 < ?_P/?_I < 2.46. Three low‐molecular weight styrene homopolymers with molecular weights of 3k, 9k, and 12k, respectively, were mixed with those block terpolymers to produce blends with almost constant styrene content within the range 0.65 < ?_S < 0.68. Both ISP/S(3k) and ISP/S(12k) blend series show a morphological transition from tetragonally packed cylinders (TPC) to double hexagonal structure (DHS) with hexagonally arrayed polyisoprene cylinders, each surrounded by six thin cylinders as satellites. If one focuses on ISP‐III(150k)/S blends whose ?_P/?_I is 0.88, TPC for ISP‐III/S(3k) was transformed to DHS for ISP‐III/S(12k), evidently due to the molecular weight effect of the added homopolymer. Finally a new periodic pattern, having P cylinders surrounded by five I cylinders each, has been discovered from ISP‐III/S(9k) at overall composition of ?_I/?_S/?_P = 0.17/0.68/0.15 and polystyrene block/styrene homopolymer ratio of w_S(b)/w_S(h) = 1.4. This structure was confirmed to possess hexagonal symmetry with larger unit cell than regular patterns ever known by X‐ray diffraction experiment. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 907–911     

Polymerization of lactide and synthesis of block copolymer catalyzed by copper(Ⅱ) Schiff base complex

In the present investigation, the novel copper Schiff base complex was synthesized and its catalytic activity was evaluated for the ring-opening polymerization (ROP) of lactide and block polymerization of poly(lactide) with poly(ethylene glycol)methyl ether.     

Meshless acoustic analysis using a weakly singular Burton-Miller boundary integral formulation

The Burton-Miller boundary integral formulation is solved by a complex variable boundary element-free method (CVBEFM) for the boundary-only meshless analysis of acoustic problems with arbitrary wavenumbers. To regularize both strongly singular and hypersingular integrals and to avoid the computation of the solid angle and its normal derivative, a weakly singular Burton-Miller formulation is derived by considering the normal derivative of the solid angle and adopting the singularity subtraction procedures. To facilitate the implementation of the CVBEFM and the approximation of gradients of the boundary variables, a stabilized complex variable moving least-square approximation is selected in the meshless discretization procedure. The results show the accuracy and efficiency of the present CVBEFM and reveal that the method can produce satisfactory results for all wavenumbers, even for extremely large wavenumbers such as k = 10 000.